FiberPatrol FP1150

Locating Fiber Optic Intrusion Detection System for Short to Medium Perimeters

Thumbnail Video Image

FiberPatrolFP1150 is a fence-mounted fiber optic intrusion detection sensor that detects and locates intruders climbing, cutting or lifting the fence fabric. FiberPatrol FP1150 is ideal for protecting medium-length perimeters and sites where EMI or in-field conductive components are a concern.

Icon of a fence with a video camera mounted on its post representing the ability of Senstar's perimeter intrusion detection and video management products to detect intrusion attempts along the perimeter

Detection Capabilities

  • Detects and locates perimeter intrusions over distances of up to 10 km (6.2 mi) per processor
  • Pinpoints intrusions with a +/-4 m (13 ft) accuracy
  • Flexible, software-based zoning
  • Accurately detects and locates multiple simultaneous intrusions
  • Reports alarms by zone number, cable distance and/or GPS coordinates.

Icon of a cog inside a shield, representing the security management features of Senstar products

Performance Features

  • Supports virtually all fence types
  • If sensor cable is cut, detection continues up to cut location
  • Full cut-immune configuration available
  • Reliably detects intrusions in the presence of non-localized environmental noise

Icon of a fiber optic cable representing Senstar's use of the technology

Fiber Optic Benefits

  • No powered or conductive items required in the field
  • Immune to EMI and lightning, intrinsically safe in explosive atmospheres
  • Long sensor cable service life (25+ years)
  • Unused fibers can be reused for other applications

How It Works

The FiberPatrol FP1150 works by transmitting pulses of laser light into a single-mode optical fiber and accurately measuring the minute light reflections that occur along its length. A disturbance of the fiber caused by fence vibrations changes the amount of light returned from that point. FiberPatrol’s reflectometry-based technology does not require the light to traverse the full length of cable. If a cable is cut, FiberPatrol retains the ability to detect and locate intrusions up to the point of the cut, thus enabling the system to support cut-immune configurations.

FiberPatrol FP1150 fiber optic fence-mounted intrusion detection sensor on a fence at the perimeter of an electrical utility station at night

FiberPatrol FP1150 Features

Protect Sites With Confidence

With supported distances of up to 10 km (6.2 mi), FP1150 is ideal for protecting a variety of sites, including airports, campuses, and petrochemical facilities. Its advanced detection algorithms detect and locate intrusions while rejecting events caused by distributed weather conditions like heavy wind and rain. For organizations, this results in higher security, higher system confidence, and lower nuisance alarms.

Enhance Existing Fence

The FP1150 works with chain-link, welded mesh and expanded metal mesh fences. A single pass of sensor cable provides effective protection for fences up to 4.3 m (14 ft) in height. The sensor may also be used on palisade-style fences depending on the specific characteristics of the fence.

Gate Protection

The FP1150 sensor cable can be installed on swinging gates to provide detection, and the gate area itself can be configured as an independent detection zone. Sliding gates are typically protected with Senstar’s Wireless Gate Sensor or UltraWave microwave sensor.

Multi-Purpose Sensor Cables

The FP1150 uses single-mode fiber within telecommunications-grade cable. In addition to having a nominal service life of 25+ years, unused fibers within the cable can be used for other purposes, including networking and providing communications to other sensors and security devices installed along the perimeter.

Cut-Immune Configuration

When the sensor cable is cut, either accidentally or in an attempt to defeat the sensor, the FP1150 immediately reports the incident, including its exact location. Moreover, the sensor retains the ability to detect and localize intrusions up to the point of the cut. When installed in the cut-immune configuration, the sensor continues to provide detection on the full perimeter even after a cable cut.

Communications Line Protection

The FP1150 is an effective way to provide physical security against third-party interference (TPI) for fiber optic data links and other cable infrastructure. The sensor’s ability to detect minute vibrations, movement, or other physical disturbances of the cable bundle or conduit enables it to detect TPI before communications are compromised.

Networking and Integration

With built-in Ethernet and support for Senstar’s UltraLink family of I/O cards, the FP1150 can work with virtually any security system.

Common Platform

The FP1150 includes a built-in alarm display application and uses the same integration software as other Senstar products, reducing training requirements while increasing operational efficiencies. Running the Windows® operating system, the system is easy to configure and manage. Alarms, control, and status information can be managed by the Network Manager software, which provides a common unified interface for Senstar’s video and security management software as well as other industry-leading third-party systems.

Deployment Diagram

FiberPatrol communicates with the security system via Ethernet. Integrations using output relays are also supported.

Diagram of FiberPatrol FP1150 fiber optic fence-mounted intrusion detection sensor as part of a security system

Additional Resources