Product Announcements

Senstar LM100 – Die integrierte Lösung für Detektion und Beleuchtung im Perimeter

Senstar stellt eine neue intelligente Perimeterschutzlösung vor

Das neuartige und innovative Konzept eines Zaunsensors mit integrierter Beleuchtung, das LM100 System von Senstar wurde erstmals auf der Perimeter Protection der Öffentlichkeit präsentiert und dabei mit großem Interesse aufgenommen.

Beim LM100 handelt es sich um ein hybrides System welches entwickelt wurde  um der zunehmenden Bedeutung der Kombination von elektronischen Sicherheitssystemen und Videotechnik gerecht zu werden und ein flexibles und universell einsetzbares Produkt anbieten zu können. Zugleich sollte dabei aber auch unter dem Aspekt der Nachhaltigkeit ein deutliches Zeichen gesetzt werden. Dies wurde mit einer 95% igen Ersparnis an Energieverbrauch im Vergleich mit einer konventionellen Anlage mit permanenter Ausleuchtung eindrucksvoll erreicht. Durch die, nur im Ereignisfall aktivierte, Beleuchtung kann zudem die unerwünschte Lichtverschmutzung massiv gesenkt werden. Dieser Effekt sorgt anderseits auch dafür, dass eine wesentlich erhöhte Aufmerksamkeit für ein reales Ereignis erzeugt wird und dadurch auch die überwachende Stelle entlastet und der Abschreckungseffekt vor Ort maximiert wird.

Schlussendlich sollte das neue System auch unter ökonomischen Aspekten glänzen. Vergleicht man die anvisierte Lebensdauer der Komponenten (mind. 15 Jahre) und die Verschmelzung bisher getrennter Leistungs- und Produktmerkmale mit den aktuell verfügbaren Systemen so ist auch dies erfolgreich gelungen. Eine Reduzierung der Gesamtkosten (total cost of ownership) um über 50% über die gesamte Lebensdauer hinweg ist durchaus realistisch.

Das LM100 System ist einfach zu installieren und äußerst flexibel für kleine und große Perimeter, als Einzellösung oder im Netzwerk einsetzbar.

Kontakt und Information:
www.senstar.de
Martin Vogler
Kaufmännischer Leiter
Senstar GmbH
[email protected]


Senstar FiberPatrol – Faseroptisches Detektionssystem

Senstar steigert die Detektionsreichweite des FiberPatrol Systems erheblich

 Durch innovative technische Weiterentwicklung wurde die Detektionsreichweite des fiberoptischen FiberPatrol Systems von Senstar erheblich erweitert und auf 50 Kilometer pro Prozessor gesteigert. Dies gilt für alle Anwendungen am Zaun im Perimeter. Sollte das faseroptische Kabel und damit das System im Erdboden vergraben sein und als Bodendetektionssystem genutzt werden, so erhöht sich die mögliche Detektionsreichweite sogar auf bis zu 80 Kilometer. Zusätzlich wurde die Detektionsgenauigkeit auf bis zu +/- 4 m erhöht.

Damit wurde die Attraktivität des Systems nochmals erheblich aufgewertet; für den Einsatz für sehr große Überwachungsstrecken, wie z.B. den Einsatz als Grenzsicherungssystem oder für große Perimeter bei Flughäfen oder Hafenanlagen sowie Energieversorgung und Pipelinesysteme. Da keinerlei sonstige Infrastruktur für den Betrieb des Sicherheitssystems erforderlich ist und auch der Aufwand für die Installation und Wartung äußerst gering ausfällt, ist das FiberPatrol System hervorragend geeignet für Überwachungsaufgaben jenseits der Ballungsräume und für entlegene Gebiete.

Dabei wird jede Art von unerwünschter Aktivität bei dem zu schützenden Objekt registriert und an die Sicherheitszentrale weitergemeldet um entsprechende Reaktionen zu ermöglichen. Zudem zeichnet sich das fiberoptische System durch Unempfindlichkeit gegenüber elektrischen Störungen und Blitzschlag aus.

Kontakt und Information:
www.senstar.de
Martin Vogler
Kaufmännischer Leiter
Senstar GmbH
[email protected]


Senstar Introduces the Senstar LM100™ Intelligent Perimeter Lighting and Sensing Solution

New first of its kind perimeter security product to be on display at ASIS 2017 Booth 4296

Dallas, Texas (ASIS 2017) –  September 26, 2017 – Senstar today introduced the Senstar LM100, the world’s first intelligent perimeter lighting and sensing solution. Combining two key security functions in one cutting-edge product, the LM100 acts as a powerful deterrent against intruders, detecting and illuminating them at the fence line while alerting a security management system (SMS).

“The Senstar LM100’s specially-engineered LED lighting was specifically designed for perimeter security applications and optimized for use with CCTV camera systems,” said Product Manager Todd Brisebois. “With its ability to sense vibrations caused by attempts to cut, climb or break through the fence, the LM100 is a highly effective tool for protecting property and assets from theft and vandalism.”

Consisting of luminaires mounted along the fence, the Senstar LM100 uses wireless self-healing mesh communication network technology to relay intrusion information enabling the system to operate in a coordinated fashion and resulting in robust site-wide security. When networked, the LM100 reports intrusion attempt locations to the site’s SMS to enable a directed response.

The Senstar LM100 provides configurable, localized, uniform lighting allowing cameras to operate with a higher dynamic range, and ensuring objects and people are illuminated while avoiding the generation of dark silhouettes in front of bright backgrounds. Its Color Rendering Index (CRI) of 70+ brings out critical details that enhance video analytics.

The Senstar LM100 is easy to install and maintain, environmentally-friendly, and is suitable for sites of all sizes as a standalone or complimentary perimeter security system.

For more information about the Senstar LM100, click here, or for a live demonstration, visit Senstar at ASIS 2017 Booth 4296. Also on the Senstar booth, check out our other perimeter intrusion detection products, and our video management systems and analytics.

About Senstar Corporation
Senstar has been safeguarding people, places and property with the world’s largest portfolio of perimeter intrusion detection sensors for over 35 years. Now combined with world-class video management systems and analytics (formerly Aimetis), Senstar offers a comprehensive suite of proven technologies that work together to reduce complexity, improve performance and unify support.

www.senstar.com  www.YouTube.com/SenstarCorp  Twitter: @SenstarCorp

For more information, please contact:
Miriam Rautiainen
Director of Marketing
+1 613 839 5572 ext. 4357
Cell: +1 613 878 3905
[email protected]


Senstar Announces FiberPatrol® for Buried Perimeter Detection Applications

Covert and undetectable fiber optic sensor ideal for protecting long perimeters and borders

Ottawa, Canada – June 2, 2017 – Senstar, the world’s largest manufacturer of perimeter intrusion detection systems (PIDS), today announced FiberPatrol for buried perimeter detection applications. Using a buried fiber optic cable and a centrally-located sensor unit, FiberPatrol provides covert detection of intruders, vehicles, and tunneling for up to 72 km (45 mi) per processor.

“The advanced technology behind FiberPatrol has been protecting critical infrastructure around the world for many years as a fence-mounted intrusion detection solution,” said Product Manager Stewart Dewar. “Engineered for buried applications, including pipeline protection, we can now provide the same reliable and accurate detecting and locating abilities, with intruders not even aware they are being monitored. These buried detection capabilities further broaden Senstar’s market-leading portfolio of perimeter intrusion detection products.”

FiberPatrol detects and locates a wide range of above and below ground threats associated with long perimeters including borders. From someone walking, running or crawling above the sensor, to heavy vehicle engine vibrations, to digging and tunneling activities, FiberPatrol pinpoints intrusion attempts to within ±10 m (±33 ft) accuracy.

FiberPatrol requires no powered or conductive items in the field, making the sensor completely immune to EMI and lightning and intrinsically safe in the presence of explosive atmospheres. It can accurately detect and locate intrusions even when there are multiple simultaneous intrusions or in the presence of spatially-distributed environmental noise that would mask the detection capability of other long-range fiber optic sensors. As well, the system’s resilient design allows detection to continue right up to the point of a cut in the sensor cable.

FiberPatrol for buried applications is ideal as a standalone protection option or as an additional layer of protection for a fence line. For buried pipeline applications, check out FiberPatrol®-PL.

About Senstar Corporation

Senstar has been manufacturing, selling and supporting the world’s largest portfolio of perimeter intrusion detection sensor technologies for 35 years. Senstar is also a leading provider of personal duress solutions. Senstar products can be found around the world in more than 80 countries, in tens of thousands of sites including borders, ports, military and government, oil and gas, correctional, and other critical sites.

www.senstar.com  www.YouTube.com/SenstarCorp  Twitter: @SenstarCorp

For more information, please contact:
Miriam Rautiainen
Director of Marketing
+1 613 839 5572 ext. 4357
Cell: +1 613 878 3905
[email protected]


Senstar Announces Extended Range Detection for FiberPatrol®-PR

Enhanced system more than doubles previous detection range capabilities and allows for more accurate intrusion locating

Ottawa, Canada – May 9, 2017 – Senstar, the world’s largest manufacturer of perimeter intrusion detection systems (PIDS), today announced that FiberPatrol-PR, its fiber optic fence-mounted sensor for perimeter applications, now provides up to 50 km (31 mi) of protection per processor, more than doubling the system’s previous detection range capability of 24 km (14.9 mi). The intrusion locating accuracy of the system has also improved to within 4 m (13 ft) from the previous 8 m (26 ft).

“This is the second time in just over a year we have implemented extended range capabilities for FiberPatrol-PR,” said Product Manager Stewart Dewar. “By enhancing the system, we are able to provide customers greater protection and more accurate locating with less infrastructure. This results in more economical deployments for long perimeter sites, including borders.”

FiberPatrol-PR uses proven fiber optic technology to detect and locate intrusions. The system has a reduced nuisance alarm rate because it can differentiate between disturbances caused by real intrusions and environmental disturbances such as wind and rain. FiberPatrol-PR can detect and accurately locate intrusions even when there are multiple simultaneous intrusions or in the presence of spatially-distributed environmental noise that would mask the detection capability of other long-range fiber optic sensors. As well, the system’s resilient design allows detection to continue right up to the point of a cut in the sensor cable. The system can also be deployed in a cut-immune configuration.

FiberPatrol-PR requires no powered or conductive items in the field, making the sensor completely immune to EMI and lightning and intrinsically safe in the presence of explosive atmospheres.

About Senstar Corporation

Senstar has been manufacturing, selling and supporting the world’s largest portfolio of perimeter intrusion detection sensor technologies for 35 years. Senstar is also a leading provider of personal duress solutions. Senstar products can be found around the world in more than 80 countries, in tens of thousands of sites including borders, ports, military and government, oil and gas, correctional, and other critical sites.

www.senstar.com  www.YouTube.com/SenstarCorp  Twitter: @SenstarCorp

For more information, please contact:
Miriam Rautiainen
Director of Marketing
+1 613 839 5572 ext. 4357
Cell: +1 613 878 3905
[email protected]


Senstar Announces Extended Range Detection Capability for FiberPatrol™-PR

Intrusion detection system for fences now detects and locates intrusions over 50 percent further distance than previous capability

Las Vegas, Nevada – April 6, 2016 – Senstar, the world’s largest manufacturer of perimeter intrusion detection systems (PIDS) is pleased to announce extended range capability for its FiberPatrol™-PR fence-mounted fiber optic intrusion detection system. The system now detects and locates intrusions over a distance of up to 24 km (14.9 mi) per processor, a 50 percent increase from the previous capability of 16 km (10 mi), making FiberPatrol-PR the longest ranging fiber optic sensor with built-in cut immunity currently available.

„Many sites in our target markets such as airports, military sites and large oil and gas facilities, have perimeter lengths of 20 km (12 mi) or more,“ said Senstar’s Product Manager Stewart Dewar. „By extending FiberPatrol’s detection range capability to 24 km (14.9 mi), we are able to secure more sites with one system, reducing overall costs and infrastructure requirements, simplifying installation and maintenance, and increasing reliability.“

FiberPatrol-PR has been protecting critical infrastructure around the world since 2009. It accurately pinpoints intrusions with a +/-8 meter accuracy and locates intrusions even when there are multiple simultaneous intrusions or in the presence of non-localized environmental noise. No power or conductive items are required in the field, making FiberPatrol-PR completely immune to EMI and lightning and intrinsically safe in the presence of explosive atmospheres. FiberPatrol-PR is fully operational after a cable cut in a cut-immune configuration.

For a demonstration of FiberPatrol™-PR, visit Senstar at Booth 7071 at ISC West in Las Vegas, Nevada from April 6-8. Check out our other exciting products: FlexZone®, our cost-effective ranging fence-mounted sensor with flexible zoning through software; OmniTrax®, our award-winning ranging buried cable detection sensor; and StarNet 2, our comprehensive security management system. Also learn about our cyber security solutions, including Tungsten, our new cyber security appliance for the edge of the network; and our solutions for correctional facilities.

About Senstar Corporation

Senstar, the trusted innovator safeguarding people, places and property, has been manufacturing, selling and supporting the world’s largest portfolio of perimeter intrusion detection sensor technologies for more than 30 years. Senstar is also a leading provider of life safety / emergency call solutions, as well as of a line of solutions that protect security networks against cyber threats and a new cellular detection and location solution. Senstar’s products and solutions can be found around the world in more than 80 countries, in tens of thousands of sites including borders, ports, military and government, oil and gas facilities, correctional facilities, and other critical sites.

www.senstar.com   www.YouTube.com/SenstarCorp  Twitter: @SenstarCorp

For more information, please contact:
Miriam Rautiainen
Director of Marketing
Senstar Corporation
+1 613 839 5572 ext. 4357
Cell: +1 613 878 3905
[email protected]

 


Senstar Introduces the UltraLink Rugged Controller

Remote management device for Senstar sensors with automated alarm response

Las Vegas, Nevada – April 6, 2016 – Senstar, the world’s largest manufacturer of perimeter intrusion detection systems (PIDS), is pleased to announce the UltraLink Rugged Controller, a ruggedized, embedded controller for unmanned sites that enables remote management of Senstar security sensors and allows local control of security functions.

Stewart Dewar, Senstar’s product manager, said: „The UltraLink Rugged Controller provides organizations with multiple unmanned sites a simplified means for alarm reporting and remote maintenance in a single device that does not need to be installed in an environmentally-controlled location.“

The UltraLink Rugged Controller connects to a site’s Senstar sensors and I/O devices and provides a standard Ethernet/IP-based interface for communication with the Security Management System (SMS) using the facility’s own WAN/SCADA network. This provides a common network access point from which all configuration and calibration can be done, and event log data can be viewed. Maintenance visits to sites are reduced, as is the need to access individual sensors when site visits are required.

The Controller can be programmed to activate video recording and deterrence devices (lights, sirens, etc.) in response to sensor alarms or diagnostic events. Alarm response actions will occur even if network connection to the central SMS is temporarily lost.

About Senstar Corporation

Senstar, the trusted innovator safeguarding people, places and property, has been manufacturing, selling and supporting the world’s largest portfolio of perimeter intrusion detection sensor technologies for more than 30 years. Senstar is also a leading provider of life safety / emergency call solutions, as well as of a line of solutions that protect security networks against cyber threats and a new cellular detection and location solution. Senstar’s products and solutions can be found around the world in more than 80 countries, in tens of thousands of sites including borders, ports, military and government, oil and gas facilities, correctional facilities, and other critical sites.

www.senstar.com www.YouTube.com/SenstarCorp Twitter: @SenstarCorp

For more information, please contact:
Miriam Rautiainen
Director of Marketing
Senstar Corporation
+1 613 839 5572 ext. 4357
Cell: +1 613 878 3905
[email protected]


Senstar Announces FiberPatrol-PL for Pipeline Integrity Monitoring

Detects and Locates Third-Party Interference Over a Distance of up to 72 km (45 mi) Per Processor

Ottawa, Ontario, Canada – January 26, 2016 – Senstar, the world’s largest manufacturer of perimeter intrusion detection systems (PIDS) is pleased to announce FiberPatrol-PL, an advanced security system for buried pipelines, optimized to detect third-party interference (TPI). FiberPatrol-PL is the latest addition to Senstar’s renowned FiberPatrol intrusion detection systems, which have been protecting critical infrastructure around the world since 2009.

FiberPatrol-PL uses fiber optic cable buried along the pipeline to detect and locate ground vibrations and acoustic signatures associated with TPI activity. A single FiberPatrol-PL processor can detect and locate TPI over a distance of up to 72 km (45 mi) and within 10 m (33 ft) accuracy.

“FiberPatrol-PL provides the longest protection per single processor currently on the market, addressing one of the biggest issues to effectively securing pipelines – covering long distances between above-ground infrastructure locations where electronic equipment can be installed,” said Senstar’s Product Manager Stewart Dewar. “No electronics, power, communications infrastructure or grounding points are required for spans of up to 72 km (fiber distance), making FiberPatrol-PL a cost-effective solution for long pipelines.”

FiberPatrol-PL detects TPI activity that threatens pipeline integrity: machine or manual digging, heavy machinery operating nearby, and even people walking in the vicinity of the pipeline. The system’s advanced detection algorithms optimize the detection of TPI activity while rejecting nuisance alarms. It can also reject vibrations caused by traffic on roads and railways running parallel or perpendicular to the pipeline.

For more information about FiberPatrol-PL, click here.

About Senstar Corporation

Senstar, the trusted innovator safeguarding people, places and property, has been manufacturing, selling and supporting the world’s largest portfolio of perimeter intrusion detection sensor technologies for more than 30 years. Senstar is also a leading provider of life safety / emergency call solutions, cyber security solutions that protect security networks against threats, and a cellular detection and location solution. Senstar’s products and solutions can be found around the world in more than 80 countries, in tens of thousands of sites including borders, ports, military and government, correctional facilities, and other critical sites.

www.senstar.com  www.YouTube.com/SenstarCorp  Twitter: @SenstarCorp

For more information, please contact:
Miriam Rautiainen
Director of Marketing
Senstar Corporation
+1 613 839 5572 ext. 4357
[email protected]


    Older Entries »